Patented modular distributor series

Do you need a power distributor that you can always completely count on, even under the most difficult and harshest operating conditions? Then the new MODBOX series of Rubber distributors is the right solution for you: MODBOX goes far beyond the ruggedness that you would normally expect from a power distributor, and does so even up to a protection rating of IP68.


Overview of the advantages 

Technical Data

  • Maximum Protection degree IP68
  • With MODBOX MIDI with user-friendly OTC operating window (OTC mechanism)
  • Modular expansion on all 4 sides
  • Yellow end corners for increased safety
  • Cover available on request with or without rain roof
  • Hard Rubber mixture with hardness grade of 99 shore
  • Corners and stability framework are made of cured glass-fibre-reinforced Polyamide
  • Outer corners luminous on request
  • Fully insulated

Material properties

  • Impact-resistant
  • UV-resistant
  • Halogen-free
  • Resistant to ageing, temperature, oil and acid
  • Excellent resistance to chemicals
  • Flame-resistant, self-extinguishing



Because when it comes to ruggedness and impact resistance, the MODBOX leaves nothing to be desired. Thanks to the new, special Rubber compound, an outstanding hardness grade of 99 Shore is achieved! But MODBOX offers you many other advantages: thanks to the modular design, the perfect, innovative solution can be found for all applications.

With respect to material properties, focus is on resistance to impact, ageing, temperature, oil and acids. In addition, the material also exhibits very good resistance to chemicals. Of course, the MODBOX is also fully insulated, UV resistant, halogen free , flame resistant and self-extinguishing.

Innovative solutions that go into the smallest detail: thanks to the innovative housing design, you can make changes to existing innovations in the shortest time. Because the separators are prepared at the factory, high- and low-voltage installations (IT, telephony, etc.) can be more easily installed. The MODBOXes can be modularly strung together without problem with no changes to the base installation – it couldn't be easier or more user-friendly!
Another special feature of this innovation is the yellow connection and cover corners. The housing is tested according to EN 62208. For even higher safety requirements, self-illuminating cover corners with a burn time of approximately seven hours are available.

Due to the compact design and modular construction, a wide range of needs and requirements (accident prevention, etc.) can be fully satisfied.

You can, of course, equip the MODBOX to meet your individual needs and easily retrofit it.

Back to overview

Glossary of terms in accordance with the international standards VDE 0623/DIN EN 60309

Shows the position of the protective contact of a socket with rated operating voltages above 50V. 

Principles of the data processing at Bals Elektrotechnik GmbH & Co. KG

International domestic plugs and sockets

Get more about our material declaration conformity.

VDE Approved Place of Manufacture - This surveillance of the factory was performed according to the European Factory Inspection Procedure

QUICK-CONNECT Twin Terminal is the screwless connection technology for CEE socket outlets to loop through invented by Bals.

Enables the screwless connection technology QUICK-CONNECT

Suitability of electrical equipment for different environmental conditions

Domestic socket outlet with push-contact

List of the basic resistance of materials in combination with the certain chemicals. 

Non-stationary test system/measurement device for industrial use.

Screw terminal TE products are added with nickel plated contacts and the contact carriers are made of high temperature resistant material.

QUICK-CONNECT TE products are added with nickel plated contacts and the contact carriers are made of high temperature resistant material.

EN ISO 9001 specifies the minimum requirements for a quality management system.

Overview over all brands by Bals

Colour coding for different operating voltages

Patentierte Schließmechanik für Betätigungsklappen.

Standard connection screw terminal.

QUICK-CONNECT is the screwless connection technology for CEE products invented by Bals.

Polycarbonate is a high-quality plastic material which is characterized by its high strength and impact resistance.

Information to the modification of standard DIN EN 61439 

KONTEX-ULTRA is a contact technology by Bals.

BALS-CONNECT - Integration of distributor systems in the IoT

KONTEX-PLUS by Bals is a contact technology

IEC System for Conformity Testing to Standards for saftey of Electrical Equipment

Polyamide is a plastic material with particularly high-quality properties.

Brand that indicates the international standardisation of CEE plugs and sockets

European Commitee for Electrotechnical Standardization

The shutter is an opening mechanism for eMobile charging plugs

MODBOX by Bals is a patented modular distributor series

Rubber housing through your high material properties and are particularly resistant to impact.

Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) is a European Union regulation dating from 18 December 2006. REACH addresses the production and use of chemical substances, and their potential impacts on both human health and the environment.

The Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.

International Electrotechnical Commission

Testing and Certification Institute

Polybutylene terephthalate (short PBT) is a thermoplastic material, which belongs to the group of polyesters.

VARIABOX, the modular distributor system

The robust twin USB charging socket for extreme applications

Underground distributor systems - Perfect for the power supply of public places

Adapted to the respective area of application

Mobile Power Distributon in 4 different sizes

Plugs and connectors in modern design.

Components for infrastructure of EV charging

MODBOX is a patented modular solid rubber wallmounted distributor series from Bals

MULTI-GRIP is a cable gland system invented by Bals with integraded gasket and strain-relief