Bals-Logo

QUICK-CONNECT

 

 

QUICK-CONNECT by Bals is a screwless connection technology based on the spring-clamp principle.

 

 

Overview of the advantages

  • QUICK-CONNECT is available from 16A 3-pole to 63A 5-pole
  • Screwless connection technology, time savings of up to 70%
  • Faster, more reliable and controlled conductor connection
  • The terminal accepts all types of copper conductors
  • QUICK-CONNECT is maintenance-free, insensitive to shocks, vibrations and temperature fluctuations
  • Colour-coded conductor entry for reliable installation

 

 

 

Details

Fast, faster, QUICK-CONNECT: with the introduction of this screwless connection technology in 1998, Bals again set new standards. We were the first company to offer this reliable and timesaving innovation. The patented system, which has unbeatable advantages over previously used screw connections, quickly developed into the industry standard.
As the only manufacturer worldwide, it goes without saying that Bals offers a screwless terminal connection for plugs and sockets even for an amperage of 63A. Also truly unique are the 16A and 32A QUICK-CONNECT phaseinverters.
 

In the opinion of many experts, our QUICK-CONNECT concept, which is based on the screwless spring-clamp system, is the best-suited system for quickly and easily meeting the various challenges encountered in the wiring and maintenance of industrial plugs and sockets in a controlled manner. 

 

 

  • The terminal accepts all types of copper conductors, rigid or flexible, with or without wire end ferrule as well as conductors of all quality grades irrespective of the conductor diameter or conductor insulation.
  • On delivery, the terminals are open and the contact pressure of the springs is optimally set.
  • Pressing the contact slide or locking lever with a finger visibly, audibly, reliably and permanently closes the terminal after the stripped conductor has been inserted.
  • Rewiring is no problem. Pressing the locking lever or contact slide again releases the conductor; unlinke insulation displacement connector technology, the conductor can then be used again without needing further processing steps.
  • The damage-free conductor clamping guarantuees an optimum connection over the entire service life.
  • QUICK-CONNECT is maintenance-free, insensitive to shocks, vibrations and temperature fluctuations.

 

Compatible conductor cross sections 

Model Characteristic Conductor cross section Characteristic
Plugs & Connectors 16A 1,5 mm2 - 2,5 mm2 flexible conductors
Plugs & Connectors 32A 2,5 mm2 - 10 mm2 flexible conductors
Plugs & Connectors 63A 6 mm- 16 mm2 flexible conductors
Panel & Surface Mounting Socket 16A 1,5 mm2 - 4 mm2 rigid & multi-wire conductors
Panel & Surface Mounting Socket 32A 2,5 mm2 - 10 mm2 rigid & multi-wire conductors
Panel & Surface Mounting Socket 63A 6 mm2 - 25 mm2 rigid & multi-wire conductors

 

 

Back to overview

Glossary of terms in accordance with the international standards VDE 0623/DIN EN 60309

Shows the position of the protective contact of a socket with rated operating voltages above 50V. 

Principles of the data processing at Bals Elektrotechnik GmbH & Co. KG

International domestic plugs and sockets

Get more about our material declaration conformity.

VDE Approved Place of Manufacture - This surveillance of the factory was performed according to the European Factory Inspection Procedure

QUICK-CONNECT Twin Terminal is the screwless connection technology for CEE socket outlets to loop through invented by Bals.

Enables the screwless connection technology QUICK-CONNECT

Suitability of electrical equipment for different environmental conditions

Domestic socket outlet with push-contact

List of the basic resistance of materials in combination with the certain chemicals. 

Non-stationary test system/measurement device for industrial use.

Screw terminal TE products are added with nickel plated contacts and the contact carriers are made of high temperature resistant material.

QUICK-CONNECT TE products are added with nickel plated contacts and the contact carriers are made of high temperature resistant material.

EN ISO 9001 specifies the minimum requirements for a quality management system.

Overview over all brands by Bals

Colour coding for different operating voltages

Patentierte Schließmechanik für Betätigungsklappen.

Standard connection screw terminal.

QUICK-CONNECT is the screwless connection technology for CEE products invented by Bals.

Polycarbonate is a high-quality plastic material which is characterized by its high strength and impact resistance.

Information to the modification of standard DIN EN 61439 

KONTEX-ULTRA is a contact technology by Bals.

BALS-CONNECT - Integration of distributor systems in the IoT

KONTEX-PLUS by Bals is a contact technology

MULTI-GRIP is a cable gland system invented by Bals with integraded gasket and strain-relief

IEC System for Conformity Testing to Standards for saftey of Electrical Equipment

Polyamide is a plastic material with particularly high-quality properties.

VARIABOX by Bals is a new distributor generation

Brand that indicates the international standardisation of CEE plugs and sockets

Range of components and many suitable solutions for electromobility.

European Commitee for Electrotechnical Standardization

The shutter is an opening mechanism for eMobile charging plugs

MODBOX by Bals is a patented modular distributor series

EVOBOX by Bals is a new portable distributor series

Rubber housing through your high material properties and are particularly resistant to impact.

Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) is a European Union regulation dating from 18 December 2006. REACH addresses the production and use of chemical substances, and their potential impacts on both human health and the environment.

The Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.

International Electrotechnical Commission

Testing and Certification Institute

Polybutylene terephthalate (short PBT) is a thermoplastic material, which belongs to the group of polyesters.